October 2026
Meeting at Graeme's
September 2026
Meeting at Bob's
August 2025
Annual Goulburn Model Expo
July 2026
Meeting at Dominic's
June 2026
Meeting at Tim's
May 2026
Meeting at Bob's
April 2026
No Meeting
March 2026
Annual Kaleen Model Train Expo
Feburary 2026
Meeting at Geoff's
December 2025
Christmas Lunch
November 2025
Meeting at Bob's

February Meeting at Geoff’s.
Attendees: Don, Garth, Geoff, Bob, Warren, Eddy, Peter, Bill, Lindsay (guest), Brian, Tim, & Ron (not pictured).
Apologies were received from – Graeme, Dominic, Chris & Rob, plus the standing apology from Errol and Pat.
Twelve members and one guest were in attendance for a nice Sunday afternoon for our 1st meeting of the year.
Geoff’s O-gauge layout occupies his double garage and is built in such a manner that it can be ‘put away’ and the garage then used for other purposes.
The layout consists of 4 circles or loops, and each loop breaks into two at one end of the layout. Four trains can be operated at the same time, with another 4 trains in the branch lines.
Much of the layout is built on boards typically 2m x 0.6m wide plus corner boards and these can be stacked up with the track remaining with them. Geoff mentioned that as he gets older, the boards seem to get heavier and is contemplating how he can make them lighter or shorter. To set up the layout usually takes a couple of days: a day to clean the garage, then a day to set it up and getting the electrics to work. The layout has no landscaping so that simplifies the setting up and putting away.
Over the past years many of our O-gauge meeting hosts have either got too old to host or have passed away, Bob Field and Geoff are the only ACT members hosting O-gauge meetings.
Fortunately a number of members bought their O-gauge locos to test out. These included: A French SNCF Hachette converted from clockwork to electric; two vintage Lionel locos 671 6-8-6 loco & 2035 2-6-4 loco, produced by Lionel between 1946 & early 1950s; a NSW 45 Class loco; two Ferris Red Rattlers; and a ‘Big Train’ by Rovex Industries UK. In addition Geoff had his vintage collection running including a Hornby Flying Scotsman and a Royal Scotsman plus some of ACE and Darstaed locos.
As usual with operating a model train layout, it is very unusual for things to run perfectly. There is always little glitches, such as dead spot on the rails (usually just dirty track) or point not operating correctly etc. On the day these little gremlins were present. There was one trouble spot, just past the section that raises to allow access into the centre of the layout which caused a problem for Geoff’s Flying Scotsman loco derailing after passing this point. After close examination of the issue, the fix was pretty simple, just a small piece of cardboard, strategically place solve the problem. There was also another partial derailment. Again another easy fix, just reconnect the track.
After playing with the trains for about an hour members then adjourned to Geoff’s dining room for a lovely afternoon tea. It was followed by a brief informal meeting to discuss recent and upcoming activities.

March is the Annual Kaleen Model Train Expo and as usual the club had both our layouts up and running for the weekend.
I would like to firstly acknowledge all those who helped out this weekend in one way or another.
Set up and pack ups:
Thanks to Rob, James, Chris, Garth, Lindsay, Tim, Bob Mc, Don and especially Bob, who did all the heavy lifting with the O Gauge layout.
Over the two days our helpers were:
Bill, James, Chris, Garth, Ray, Bob, Lindsay, Tim, Bob Mc, Eddiel, Brian Roberts, Peter Rowell, Graeme Thomson & Geoff Wood.
Missing from this years helpers list was Dominic, who taking a well deserved break. In his absence a couple of his trainees operated the much loved Dublo mail train.
Based on preliminary estimates from the organisers, numbers were slightly down. However they were pleased that despite the current international circumstances that had dramatically increase prices at the petrol pump, all exhibitors and traders were in attendance, including some new exhibitors.
As usual both our layouts attracted a lot of attention from both young and old. From the Thomas the Tank engine locos on the O gauge, to the mail train operations on the Dublo.

No Meeting this month.

Attendees: Garth, Chris, Geoff, Peter, Bill, Brian, Tim, Rob, Ron & Bob
Apologies were received from – Don, Dominic & Graeme.
It was a somewhat gloomy Sunday, as 10 members of the club met up for only our 2nd meeting this year.
There was nothing specific that Bob had running today, so a few of those attending brought along some locos to give them a run. But those there took the opportunity to have a pleasant chat about all things trains and beyond.
After playing with the trains for about an hour members then moved inside for a lovely afternoon tea. It was followed by a brief informal meeting to discuss recent and upcoming activities.
The main topic for discussion was the Annual Goulburn Train Show. Will Ron advised that our application to participate had been accepted and we will be in the main building this year. Also joining us will be Chris who will bring down a layout, most probably Australian themed. Chris will have his layout next to ours.
Closer to the event, we will need volunteers to help out over the course of the weekend, pretty much similar to last year.
Tim, who was unable to host his usual April meeting due to the passing of his beloved companion Max, put his hand up to host our June meeting. Also Dominic has volunteered to host a meeting in August with the date to be confirmed with him.

Pictured Garth, Brian, Warren, Bill, Lyndsay, Ron, Chris, Tim & Geoff (Peter took the photo).
Apologies were received from – Don, Dominic, Rob, Bob Mc & Bob.
It was a fairly typical Canberra winters, quite mild even though it was drizzly, day as 10 members of the club met up for at Tim’s place.
For those who have not been to Tim’s before, his layout is set in a fictional 60s English country village, somewhere between London and Cardiff. It features an outer loop (the main line) and an inner loop (the branch line), with siding complexes for both loops. Being a rural setting it has a small farm and a lake for fishing. Tim also provided a bit of history on his layout, particularly the choice of Dublo 2-rail, basically down to his father! Tim has now completed Stage One of his Hornby Dublo 2-rail layout. That is, every square centimetre of the table top is now covered with some form of scenery and all the buildings are complete and installed (and it only took 17 years!).
Stage Two can now commence, which comprises more detail, more trees, bushes and shrubs, more rocks, drawing the lines on the tennis courts, etc.
Initially running on the outside loop (the main line) was a BR Bo-Bo Diesel-Electric locomotive hauling a mixed freight. Running on the inside loop (the branch line) was an 0-6-2 Tank locomotive hauling three suburban coaches (S.R.).
Brian and Bill then made another valiant attempt to diagnose the mysterious voltage drop through the station complex on the outer loop that has always existed, but without any luck. Some clues were uncovered however, giving some options for Tim to pursue.
The suburban passenger train was then backed into the siding complex. Tim was then able to bring out of the siding complex onto the inner loop a 0-6-0 Tank Locomotive B.R. (Black) hauling two Maroon suburban coaches. On the outer loop, Tim shunted the freight train into a siding and it was replaced with a Co-Co Diesel hauling two Pullman coaches.
Tim also demonstrated his test rig for testing the performance of Hornby Dublo 2-rail locomotives. This rig was developed based on information contained in the late David Neal’s seminal book Hornby Dublo Technical Manual (see page 17). The rig is pretty simple comprising a Hornby Dublo Power Control Unit Type A3, a multi-meter (in series) to measure the amps drawn and a plinth on which the locomotive is placed, so that it can be run forwards and backwards at full speed while stationary. The motor should draw less than 450mA. If the reading is above this a clean and re-oil and/or a remag are required.
After playing with the trains for about an hour members then moved inside to the warmth of Tim’s lounge room for a lovely afternoon tea. It was followed by a brief informal meeting to discuss recent and upcoming activities.

July Meeting at Dominic's.
Attendees: Brian, Tim, Graeme, James, Garth, Chris, Dominic, Peter & Ron.
Apologies were received from – Don, Bob, Bill, Geoff, Lindsay, Eddy and Mel.
Over the past seven years, Dominic has built a Dublo 2-rail layout in his back shed comprising mainline single track loop with 3 platform through station, engine shed and sidings, a goods yard, and a branch line to a halt station. The layout and scenery is now complete; Dominic's focus is now on reasonably realistic train running.
First cab off the rank was a Co-Co Diesel Electric hauling a rake of six carriages including a Travelling Post Office. The TPO worked fine although at one stage did violently throw a mailbag past the collect and onto the floor! Next was an A4 Streamlined Pacific hauling four Pullman coaches. Light running of Co-Bo and Bo-Bo Diesel Electrics proved their serviceability.
An 0-6-0 Diesel shunter prepared the goods train of 11 wagons which was then hauled round the track by a BR 2-8-0 Class 8F. This was followed by a 3 car SR EMU and a light running 0-6-2 tank.
Finally branch line operations: a 2-6-4 tank loco hauling two carriages ran to the mainline station where it switched to running the main loop. Returning to the mainline station, it ran around its carriages and hauled them back to the halt station where again it run around its carriages in readiness for the return trip. Finally, an 0-6-0 SR tank hauling a couple of coal wagons was taken for a run.
Brian brought along a Bo-Bo diesel which had been converted from 3-rail to 2-rail. It ran well and will now get further attention. Graeme brought along a Santa Fe rail motor which he intends to convert to Marklin operation. It also tested well. Dominic then demonstrated a Rolling Rail set up to run locos without using an actual track layout.

Goulburn Model Train Expo
Helpers: Garth, Peter, James, Bob Mc, Eddy, Dominic, Graeme, Tim & Ron.
The ACT group participated in the Goulburn Model Train Expo, which was held on the weekend of 29-30 August, were we had out Dublo Layout on display.
Due to the increased interested in being part of the Expo, it had to expand into a 3rd building. However in response to the conditions last year, we made sure we were in the main building.
The weather really pleasant in Goulburn that weekend. The Expos itself was very well attended with apparently record attendance on Saturday. Sunday was very busy early on, but attendances dropped off after lunch.
Joining us this year was Chris and Winnie, HRCAA members from Sydney.
Chris did an amazing job, creating his layout from scratch on Friday afternoon. It was basically a French style layout, featuring a good deal of Chris's French rolling stock.

September Meeting Report
Host - Bob
Pictured: Bob, Brian, Eddy, Dominic, Graeme, Peter, James, Tim, Geoff Wood. Not pictured Ron.
Apologies: Chris, Bill, Bob.
Despite the fickle weather in Canberra at this time of year, it was a pretty nice Spring day as 9 members made their way to our host, Bob's, place.
This was the second meeting at Bob's and whist his layout remains a work in progress it was evident that significant progress had been made. The landscaping is impressive and it was noticeable that the incidence of de-railments on the 3 rail layout have diminished.
The layout is in a folded dog bone format with the Hornby Dublo 3 rail layout occupying the baseboard while a smaller Hornby 2 rail layout operates above the baseboard. This configuration has complicated the landscaping in that sections have to be removable to access the 'hidden' 3 rail track in the event of short circuits and derailments.
The two layouts are largely unchanged although Bob has tweaked the 3 rail track to minimise derailments. For example by ensuring main lines enter and exit points on straight track, replacing some electric points with manual points because front bogies were switching the points and derailing locomotives and, as necessary, not screwing down points nor the adjoining track. Improvement was evident, but more to be done.
One of the landscaping features is a curved cantilevered rock face that overhangs part of the 3 rail turntable. Bob experimented with various designs and materials before settling on a plywood base, with overlapping short pieces of particleboard being screwed and glued to create the curved cantilever. Large garden mulch pieces were then cut to create a square face that was glued to the protruding particleboard to create the appearance of a rock face. An impressive result!
Some dressing of the layout with accessories has been completed and Bob used a 3 D printer to create some items including tunnel portals, a farm house and barn and farm animals.
Bob is adding to his collection of 3 rail locomotives and on the day was running a number of his recent additions: a 3218 Locomotive 80059 and several N2 Tanks; LMS 6917, LNER 9596 and GWR 6699. He has not added to his 2 rail collection and was running his HST Inter City 125 and NSWR Diesel Freight locomotive set.
Other members took the opportunity to run locomotives and all were surprised with how well they ran.
What's next? Operate and enjoy the layout while finishing the landscaping, installing more signals, reorganising the wiring so it can be easily traced and cleaning the rolling stock wheels. Plus, a number of other 'fixes'.
Due to the limited space in Bob's train room, there was only space for a few members at a time, so it was a matter of taking turns checking out the layout with Bob more than willing to provide an overview on what work he has undertaken in the past 12 or so months.
While this was going on, other members we in the front part of the garage having the usual discussions about Life, the Universe and Everything as well as sorting through a box of recently donated Dublo items. Apart from a largish quantity of 3 rail track, in remarkably good condition considering it had been in storage for many years, plus there were some gems in there as well.
Then it was time to adjourn to the patio for a cuppa and to enjoy a very lovely afternoon team, provided by Bob and Vicky.
Apart from the usual banter around the table, talking about current affairs but mostly trains, there was a brief discussion on upcoming meetings and our Christmas Lunch.

October meeting at Graems's.
Club attendees: .
Apologies were received from –
Report to come

October meeting at Bob's.
Club attendees: Bob, Peter, Brian, Dominic, Warren, Geoff, Bill, Tim and Ron.
Apologies were received from – Rob, Don, & Chris
Unfortunately due to some issues, Bob's layout was not working today.
It was a lovely spring day get together, as club members enjoyed nice relaxing afternoon chatting besides Bob's pool.

December - Christmas Lunch at the Weston Creek Bowling Club.
Club attendees: Peter, Bob Mc, Dominic, Bill, Chris, Don, Garth, Tim, Bob F, Ron, Trevor, Rob
Also attending: Lisa, Margie, Krystyna, Devika,Vicky, Sandra & Pam
Apologies were received from – James, Geoff & Graeme
Designed & Maintained by Arties Web Creations